Skip to main content

Painting Day #2!!

Well today was the big day for immediate change! I sprayed on the blue. It looks OK in most areas with one big goof.

Took about an hour to mask... never did get it very straight. Oh well...

Here it is with the first pass of deep blue from Klass Kote.  I sprayed on a coat of white over the masking so that the white would bleed onto the white underneath. Then you spray the color over the top. This makes for a very sharp masking line with very little bleeding.

The goof: However, I apparently sprayed the white too heavy because I had a HUGE sag. Ugh. What to do??? The sag was white so I couldn't let it dry and then sand it down later because the white would show through. The only thing I could think of was to take a paper towel and wipe the sag off. Ugh! It still shows the wiping streaks but at least now I can sand it a bit and not go through the blue to the white. Hopefully when I add a few coats of clear epoxy it will be virtually unnoticeable.


If you look carefully at the picture below you can see where I had to wipe off the paint and then spray over it. God...



This picture looks like a lot of orange peel but it's actually not that bad. 


Ended up only doing two coats of blue. Brought it inside, removed the masking (very carefully!) and viola! Ta da!


As usual there are plenty of places that I'll need to touch up and/or sand down. But the idea is that several coats of clear epoxy will go over the entire hull and should even out a lot of the trouble spots.


Peace!  _/)


Comments

  1. naptaleneMarch 28, 2015 at 2:56 AM

    I just read the entire blog
    Looks great and like a very fun project to try. Could you elaborate on how you made the strips for the planking?

    ReplyDelete
  2. SteveMarch 28, 2015 at 7:09 AM

    Hello,

    Thanks for you comments! I am very fortunate to have a table saw. With that I am able to buy clear, kiln-dried cedar and mill my own planks. However, there are a number of online hobby lumber sellers out there who sell strips of balsa, spruce, and other species in 48" lengths that would make good planks. Check out National Balsa. There are several others too.

    Good luck!

    ReplyDelete
  3. naptaleneMarch 29, 2015 at 2:44 AM

    I'll have to see what I can get locally, thanks :)

    ReplyDelete

Post a Comment

Please feel free to leave comments regarding building a Star 45.

Popular posts from this blog

Introducing the Salish 475 RC Sailboat

Yes, it's the same boat, but with a new name all its own... the Salish 475 RC Sailboat . Perhaps it should be formally known as the Coast Salish 475 in homage to the First Nations Coast Salish peoples of the Pacific Northwest and to better define it as being from the PNW coast. Some might object to it being named after a people though, so in that case it will be simply the Salish 475 as in the Salish Sea. Although I have taken 9 credits at the University of Washington from Bill Holm on Northwest Coast Native American art, I do not have adequate talents yet to incorporate NW Coast art onto the boat. Perhaps in a future boat! A number of ideas were floated on the RC Groups discussion , but the final vote was my wife's. I like it! By the way... it's pronounced "Say lish". The Coast Salish 475 : LOA: 47.5" Beam: 11.375" Weight: 14.5 lbs, 9 of it in the bulb (Yes, it could easily be build lighter... this was the prototype) Kiln-dried cedar ...
Post a Comment
Read more

Moving to a new RC Sailboat blog! Check it out...

Since I've now sold the T37 , and have completed these two Star 45's (well... one Star 45 and one Salish 475), I thought it would be a good time to end these two blogs and focus on one generic RC Sailboat blog where I could post any new RC sailboat projects. Please check out my new blog at http://www.rcmodelyachts.com/ . Or you can use my older address of http://rcsailboats.blogspot.com/ . If interested in the Star 45 Construction Manual , you have two options: 1. An electronic PDF version for $20. Email me for details and payment. You will send a PayPal payment to my account and then I will email you the PDF. 2. For a full-color, printed copy (they're coil bound so they will stay open to any page!), go to Lulu Press . They are $35 and only take a week or so to get to you. So with that, I'm officially signing off! Peace!
Post a Comment
Read more

Salish 475 pictures

More pictures of the new Salish 475 RC (radio control) Sailboat... Hope you like it! Also see the posting on RC Groups under Sailboats . See what else I'm working on at my other blog: http://www.rcmodelyachts.com.  Until I develop a logo/icon/symbol thing for the Salish 475 I'll just use the numbers on the sail. You can see them in the picture below using the font Slugfest. The logo/icon thing will need to be in the Northwest Native American art style and reflective of the Coast Salish people (or maybe some of the people's a bit to the north... Haida, etc... they also have amazingly beautiful art!) Aloha!  _/) Fine art radio control sailboat. Wooden radio controlled sailboat. classic wooden radio control sailboat. Star 45 RC Sailboat. Salish 475 RC sailboat. R/C Wooden Salish 475 RC Sailboat radio control sailboats Star 45Radio Control. Radio Sailing. Classic wood sailboat. Cedar hull planking. Cedar sailboat bottom. Wooden sail...
Post a Comment
Read more