Skip to main content

Transom supports

Only one small thing done today. I epoxied in some hardwood (walnut) pieces inside the hull right at the transom. The center one is to help hold a backstay screw and give it something to bite into. The two other pieces to either side of the center are for drain plugs.

The idea is that I will drill through the transom into the two pieces and as close to the bottom of the hull as I can. Then I will bed stainless steel screws in thickened epoxy and put them into the holes to harden. Later, when fully cured, I should be able to simply snap the screws and they should come right out leaving a nice drain hole. I can then use a clean SS screw and a neoprene washer as a drain plug. More later as I do the steps.

You can also get an idea of how it works by looking at my Tippecanoe T37 build blog. I made a similar drain plug on that boat and it turned out great. 



Fair seas!   _/) 



Comments

Post a Comment

Please feel free to leave comments regarding building a Star 45.

Popular posts from this blog

Introducing the Salish 475 RC Sailboat

Yes, it's the same boat, but with a new name all its own... the Salish 475 RC Sailboat . Perhaps it should be formally known as the Coast Salish 475 in homage to the First Nations Coast Salish peoples of the Pacific Northwest and to better define it as being from the PNW coast. Some might object to it being named after a people though, so in that case it will be simply the Salish 475 as in the Salish Sea. Although I have taken 9 credits at the University of Washington from Bill Holm on Northwest Coast Native American art, I do not have adequate talents yet to incorporate NW Coast art onto the boat. Perhaps in a future boat! A number of ideas were floated on the RC Groups discussion , but the final vote was my wife's. I like it! By the way... it's pronounced "Say lish". The Coast Salish 475 : LOA: 47.5" Beam: 11.375" Weight: 14.5 lbs, 9 of it in the bulb (Yes, it could easily be build lighter... this was the prototype) Kiln-dried cedar ...
Post a Comment
Read more

Moving to a new RC Sailboat blog! Check it out...

Since I've now sold the T37 , and have completed these two Star 45's (well... one Star 45 and one Salish 475), I thought it would be a good time to end these two blogs and focus on one generic RC Sailboat blog where I could post any new RC sailboat projects. Please check out my new blog at http://www.rcmodelyachts.com/ . Or you can use my older address of http://rcsailboats.blogspot.com/ . If interested in the Star 45 Construction Manual , you have two options: 1. An electronic PDF version for $20. Email me for details and payment. You will send a PayPal payment to my account and then I will email you the PDF. 2. For a full-color, printed copy (they're coil bound so they will stay open to any page!), go to Lulu Press . They are $35 and only take a week or so to get to you. So with that, I'm officially signing off! Peace!
Post a Comment
Read more

Salish 475 pictures

More pictures of the new Salish 475 RC (radio control) Sailboat... Hope you like it! Also see the posting on RC Groups under Sailboats . See what else I'm working on at my other blog: http://www.rcmodelyachts.com.  Until I develop a logo/icon/symbol thing for the Salish 475 I'll just use the numbers on the sail. You can see them in the picture below using the font Slugfest. The logo/icon thing will need to be in the Northwest Native American art style and reflective of the Coast Salish people (or maybe some of the people's a bit to the north... Haida, etc... they also have amazingly beautiful art!) Aloha!  _/) Fine art radio control sailboat. Wooden radio controlled sailboat. classic wooden radio control sailboat. Star 45 RC Sailboat. Salish 475 RC sailboat. R/C Wooden Salish 475 RC Sailboat radio control sailboats Star 45Radio Control. Radio Sailing. Classic wood sailboat. Cedar hull planking. Cedar sailboat bottom. Wooden sail...
Post a Comment
Read more