Rudder control line installation begun

Today I began to install the rudder control line. I had a number of ideas and couldn't decide which would work best and look best. In the end I came up with this. You'll have to decide for yourself how you like it once it's all done.

For now though I drilled a hole through a short piece of dowel and glued it at an angle to the bottom of the hull just aft of the rudder servo. It's at an angle because the cable has to go under the cockpit bulkhead that I installed and then angle up to meet the servo. It make more sense by looking at the pictures.

More on that later.

Also thought it would be useful to show the cockpit deck cross supports that I glued in several steps ago. I wanted to add a picture that shows how the supports gently slope aft, especially relative to the side stringers.

This is all new to me so I'm not certain of a timeline, but my guess is that I might be able to install the cockpit deck tomorrow. Haven't decided yet though if I'll fiberglass the wood deck or just give it a coat or three of clear epoxy paint. Might even varnish it for better UV protection. Hmm... always something to think about!

Peace! _/)

Comments

Introducing the Salish 475 RC Sailboat

Yes, it's the same boat, but with a new name all its own... the Salish 475 RC Sailboat . Perhaps it should be formally known as the Coast Salish 475 in homage to the First Nations Coast Salish peoples of the Pacific Northwest and to better define it as being from the PNW coast. Some might object to it being named after a people though, so in that case it will be simply the Salish 475 as in the Salish Sea. Although I have taken 9 credits at the University of Washington from Bill Holm on Northwest Coast Native American art, I do not have adequate talents yet to incorporate NW Coast art onto the boat. Perhaps in a future boat! A number of ideas were floated on the RC Groups discussion , but the final vote was my wife's. I like it! By the way... it's pronounced "Say lish". The Coast Salish 475 : LOA: 47.5" Beam: 11.375" Weight: 14.5 lbs, 9 of it in the bulb (Yes, it could easily be build lighter... this was the prototype) Kiln-dried cedar ...

Moving to a new RC Sailboat blog! Check it out...

Since I've now sold the T37 , and have completed these two Star 45's (well... one Star 45 and one Salish 475), I thought it would be a good time to end these two blogs and focus on one generic RC Sailboat blog where I could post any new RC sailboat projects. Please check out my new blog at http://www.rcmodelyachts.com/ . Or you can use my older address of http://rcsailboats.blogspot.com/ . If interested in the Star 45 Construction Manual , you have two options: 1. An electronic PDF version for $20. Email me for details and payment. You will send a PayPal payment to my account and then I will email you the PDF. 2. For a full-color, printed copy (they're coil bound so they will stay open to any page!), go to Lulu Press . They are $35 and only take a week or so to get to you. So with that, I'm officially signing off! Peace!

Salish 475 pictures

More pictures of the new Salish 475 RC (radio control) Sailboat... Hope you like it! Also see the posting on RC Groups under Sailboats . See what else I'm working on at my other blog: http://www.rcmodelyachts.com. Until I develop a logo/icon/symbol thing for the Salish 475 I'll just use the numbers on the sail. You can see them in the picture below using the font Slugfest. The logo/icon thing will need to be in the Northwest Native American art style and reflective of the Coast Salish people (or maybe some of the people's a bit to the north... Haida, etc... they also have amazingly beautiful art!) Aloha! _/) Fine art radio control sailboat. Wooden radio controlled sailboat. classic wooden radio control sailboat. Star 45 RC Sailboat. Salish 475 RC sailboat. R/C Wooden Salish 475 RC Sailboat radio control sailboats Star 45Radio Control. Radio Sailing. Classic wood sailboat. Cedar hull planking. Cedar sailboat bottom. Wooden sail...

Star 45 RC Sailboat Build Blog

Search This Blog