Skip to main content

Sanded the hull and Second Coat of Epoxy

The hull sanded out well, but still needed to go further. I didn't want to cut into the glass too much so I added two additional coats of epoxy this morning to build up a bit on top of the first sanded coat. This way I'll have plenty of room to sand down to where the entire boat is even.


Also got started on the keel threaded rods. Cut the 36" stainless steel 10-24 threaded rod I got from Tacoma Screw so that I had two 9" rods. Yesterday I laminated the first three panels, so today I bedded the rods in the slots with thickened epoxy. I made some cuts into the rods so that the epoxy would grip the rods completely and never come out. I felt that bending the rod would be a bit of overkill and I'm already heavy enough. This method should be more than plenty strong!


Later, after all my keel tubes have been installed, I will make a final cut on the rods. But for now the 9" gives more than enough extra room to work with.

Tomorrow I'll be sanding the hull.


Stay warm!

Comments

Popular posts from this blog

Introducing the Salish 475 RC Sailboat

Yes, it's the same boat, but with a new name all its own... the Salish 475 RC Sailboat . Perhaps it should be formally known as the Coast Salish 475 in homage to the First Nations Coast Salish peoples of the Pacific Northwest and to better define it as being from the PNW coast. Some might object to it being named after a people though, so in that case it will be simply the Salish 475 as in the Salish Sea. Although I have taken 9 credits at the University of Washington from Bill Holm on Northwest Coast Native American art, I do not have adequate talents yet to incorporate NW Coast art onto the boat. Perhaps in a future boat! A number of ideas were floated on the RC Groups discussion , but the final vote was my wife's. I like it! By the way... it's pronounced "Say lish". The Coast Salish 475 : LOA: 47.5" Beam: 11.375" Weight: 14.5 lbs, 9 of it in the bulb (Yes, it could easily be build lighter... this was the prototype) Kiln-dried cedar

Moving to a new RC Sailboat blog! Check it out...

Since I've now sold the T37 , and have completed these two Star 45's (well... one Star 45 and one Salish 475), I thought it would be a good time to end these two blogs and focus on one generic RC Sailboat blog where I could post any new RC sailboat projects. Please check out my new blog at http://www.rcmodelyachts.com/ . Or you can use my older address of http://rcsailboats.blogspot.com/ . If interested in the Star 45 Construction Manual , you have two options: 1. An electronic PDF version for $20. Email me for details and payment. You will send a PayPal payment to my account and then I will email you the PDF. 2. For a full-color, printed copy (they're coil bound so they will stay open to any page!), go to Lulu Press . They are $35 and only take a week or so to get to you. So with that, I'm officially signing off! Peace!

Salish 475 pictures

More pictures of the new Salish 475 RC (radio control) Sailboat... Hope you like it! Also see the posting on RC Groups under Sailboats . See what else I'm working on at my other blog: http://www.rcmodelyachts.com.  Until I develop a logo/icon/symbol thing for the Salish 475 I'll just use the numbers on the sail. You can see them in the picture below using the font Slugfest. The logo/icon thing will need to be in the Northwest Native American art style and reflective of the Coast Salish people (or maybe some of the people's a bit to the north... Haida, etc... they also have amazingly beautiful art!) Aloha!  _/) Fine art radio control sailboat. Wooden radio controlled sailboat. classic wooden radio control sailboat. Star 45 RC Sailboat. Salish 475 RC sailboat. R/C Wooden Salish 475 RC Sailboat radio control sailboats Star 45Radio Control. Radio Sailing. Classic wood sailboat. Cedar hull planking. Cedar sailboat bottom. Wooden sail